Installing Collector

The security module attached to the Single Board Computer will flash (Blue Led) once every 3 seconds in normal operation. If the security module is continually flashing then the collector has not booted correctly or is still booting. Allow 1-2 mins for the collector to boot.

Power on Collector using the official power supply supplied, leave to boot for 1-2 mins

Connect to the Wi-Fi network broadcasted as OnsiteConfig, enter the Wi-Fi password, Password123

Browse to the IP address http://192.168.150.1

Choose between Wi-Fi or Ethernet

Tip: If using Ethernet, connect this before applying the network settings, then you can test the connection immediately when applied.