Installing Collector

The security module attached to the Single Board Computer will flash (Blue Led) once every 3 seconds in normal operation. If the security module is continually flashing then the collector has not booted correctly or is still booting. Allow 1-2 mins for the collector to boot.

Power on Collector using the official power supply supplied, leave to boot for 1-2 mins

Connect to the Wi-Fi network broadcasted as OnsiteConfig, enter the Wi-Fi password, Password123

Browse to the IP address http://192.168.150.1

Choose between Wi-Fi or Ethernet

Tip: If using Ethernet, connect this before applying the network settings, then you can test the connection immediately when applied. Choosing ethernet means you can stay connected to the OnsiteConfig network instead as this uses Wi-Fi.